3sixty is a light ring that clips around any standard dartboard — no shadows on the wire, no dark spots on the double, no excuses on your finish. Fits between board and surround, or mounts with supplied brackets in minutes.
3sixty is designed to go from box to bright in one sitting. Follow the sequence below — screws only needed if you choose the fixed-mount option in step 3.
Insert each post between the dartboard and the surround at the numbered location shown on the sticker on the back of the post.
Ensure each post fits firmly and does not slip before you continue to the next post.
Prefer a fixed installation? Attach the supplied brackets to the board using the supplied screws.
Once all posts are in place, clip the light ring into the posts, working carefully around the board.
Ensure the connection sits close to the power source and the cable stays clear of the playing area.
Plug in the power supply — the energy-efficient LEDs illuminate immediately once connected.
Your dartboard is ready to use with bright, even, shadow-free lighting from every angle.
*A screwdriver is only needed if you choose the optional fixed bracket mount in step 3.
Choose the method that suits your setup — both use the same light ring and posts, so you can switch later without buying anything new.
The default method. Posts wedge snugly into the gap between your dartboard and its surround — no drilling, no marks left behind, and no tools needed. Ideal for renters, clubs, and anyone who wants to remove the ring later.
For a fixed, permanent setup — attach the supplied brackets directly to the board with the supplied screws. Best for home game rooms and bars where the board stays put.
Nothing complicated — just good habits for cable placement and power handling.
Avoid pulling or stretching the power cable when positioning the ring.
Route the cable away from walkways and the dart throwing area at all times.
Disconnect power before adjusting, removing, or relocating the light ring.
Unless the product packaging explicitly states otherwise, use indoors only.
Still unsure about something? The answer's probably here — and if not, the contact form below is right there.
Yes — 3sixty is designed to fit any standard dartboard. Use the post-and-surround method if your board sits in a surround, or the screw-mounted brackets for a board without one.
Not unless you want to. The default post-and-surround method is entirely tool-free and reversible. Drilling is only needed if you choose the fixed screw-mounted bracket option.
A durable polypropylene light ring with aluminum mounting brackets, and energy-efficient LEDs that illuminate the instant you plug in.
Most people are throwing under even light within about fifteen minutes — seven steps, no tools required unless you're fitting the fixed brackets.
Yes — it's light enough to unclip and pack up for a mate's place, a club night, or a tournament, then reinstall in minutes.
Every 3sixty is backed by our 100% satisfaction guarantee. The power adapter carries a 3-month warranty; the ring, posts, and brackets aren't affected. Get in touch and we'll sort it out.
Yes — for bulk or venue orders, contact us directly and we'll sort out pricing.
Mounting posts, screws, and power supply all included. Pick your mounting method and you're throwing under even light in under fifteen minutes.
Ships with posts · screws · power supply · 100% satisfaction guarantee*
*Power adapter carries a 3-month warranty. Ring, posts, and brackets aren't affected.
Bulk pricing for clubs and bars, warranty questions, or just want to check it'll fit your board — send us a message and we'll get back to you.